|
Kod Code |
Ürün Adı Product Name |
Ölçü Measurement |
|---|---|---|
| ELSK001 | Birleştirme Manşonu / Straight Pipe Socket | 40-50-63-75-90-110-118-160 |
| ELSK002 | Sızdırmaz Conta / Spiral Pipe Muff | 40-50-63-75-90-110-118-160 |
| ELSK003 | Destek Parçası / Transparent Spiral Pipe Muff | 40-50-63-75-90-110-118-160 |
| ELSK004 | 90° Dirsek / 90° Elbow | 40-50-63-75-90-110-118-160 |
| ELSK005 | Boru Tapası / T Elbow | 40-50-63-75-90-110-118-160 |
|
Koruma Sınıfı Protection Class |
TS EN 61386-22 |
|
Min. Çalışma Sıcaklığı Min. Operating Temp. |
320N-Hafif-30sn-23±2 |
|
Max. Çalışma Sıcaklığı Max. Operating Temp. |
1 kg/100mm/-5°C |
|
Yalıtım Direnci Insulation Resistance |
90°C |
|
Deney Gerilimi Test Voltage |
60°C |
|
Sıkıştırma Dayanımı Compression Strength |
-25°C |
|
Standart Standard |
PE |
|
Hammadde Raw Material |
Pe |
|
Renk Kodları Color Codes |
01 02 03 04 05 06 07 |
The TS EN 61386-24 standard describes underground pipe systems for electrical installations. The standard does not include descriptions such as the type, shape, raw material, inner and outer diameter, and wall thickness of the pipe. This standard shows the performance criteria required for the pipes to operate safely and for a long time under suitable environmental conditions. The standard mentions mechanical tests for the part of the pipe that remains underground. These are tests that describe the soil force that the pipe will bear on and the resistance to impacts it may receive. Flame spreading properties are not mentioned in pipes laid underground. Flexible coil-wound pipes are suitable for works on rough terrain, environmental lighting infrastructures, etc. and are suitable for installations buried by excavation. They are not suitable for use in horizontal drilling applications. Corrugated pipes are produced in a rigid form and are suitable for use on flat terrain. They should not be used in rough ground, etc. and the pipe should not be bent. It is recommended to use manholes or elbows in turns. Corrugated pipes have thinner walls than flexible pipes. They should be laid underground up to a maximum of 50 cm and bedding should be provided. The excavation soil should not be directly covered over the pipe and should be covered by sandblasting. Otherwise, breakage and dents in the pipe form may occur. A sealed type sleeve should be used for leak-proofing. However, it is still not suitable for use in waste water and sewage systems. The features given in the table are valid for products with our brand printed on them.