|
Kod Code |
Ürün Adı Product Name |
|---|---|
| ELSK101 | Sıva Altı Tesisat Ek Elemanları / Recessed Installtion Additional Elements |
| ELSK201 | Tünel Tipi Geçmeli Derin Kasa / Tunnel Type Interlocking Deep Case |
| ELSK301 | Tünel Tipi Geçmeli Derin Kasa Kapağı / Tunnel Type Interlocking Deep Case Cover |
| ELSK401 | Desant Tipi Geçmeli Derin Kasa / Desant Type Interlocking Deep Case |
| ELSK501 | Desant Tipi Geçmeli Derin Kasa Kapağı / Desant Type Interlocking Deep Case Cover |
| ELSK601 | Kısa Anahtar Kasası / Short Key Safe |
| ELSK701 | Alçıpan Kasa / Plasterboard Case |
| ELSK801 | Geçmeli Alçıpan Kasa / Interlocking Plasterboard Case |
| ELSK901 | Alçıpan Kasa 2’li / Plasterboard Case 2 Pieces |
| ELSK1001 | Alçıpan Kasa 3’lü / Plasterboard Case 3 Pieces |
| ELSB101 | Tünel Beton Buat / Tunnel Concrete Junction Box |
| ELSB201 | Tünel Beton Buat Kapağı / Tunnel Concrete Junction Cover |
| ELSB301 | Lüx Buat Kapağı / Luxury Junction Box Cover |
| ELSB401 | 100×100 Kare Buat / 100×100 Square Junction Box Cover |
| ELSB501 | 120×120 Kare Buat / 120×120 Square Junction Box Cover |
| ELSB601 | 150×150 Kare Buat / 150×150 Square Junction Box Cover |
| ELSB701 | 200×200 Kare Buat / 200×200 Square Junction Box Cover |
| ELSB801 | Buat Kasası Komple / Junction Box Complete |
| ELSB901 | Buat Kasası Üst Kapak / Junction Box Top Cover |
| ELSA101 | Plastik Takoz / Plastic Wedge |
| ELSA201 | Kalıba Tespit Elemanı / Mold Fastening Element |
| ELSA301 | Aplik Bağlantı Aparatı / Applique Connection Apparatus |
| ELSA401 | Aplik Eğik Bağlantı Aparatı / Applique Oblique Connection Apparatus |
|
Koruma Sınıfı Protection Class |
IP30 |
|
Min. Çalışma Sıcaklığı Min. Operating Temp. |
-25°C |
|
Max. Çalışma Sıcaklığı Max. Operating Temp. |
90°C |
|
Yalıtım Direnci Insulation Resistance |
≥5MΩ |
|
Deney Gerilimi Test Voltage |
>130≤250 V/2000V |
|
Sıkıştırma Dayanımı Compression Strength |
500N ±5N |
|
Standart Standard |
TS EN 60670-22 |
|
Hammadde Raw Material |
PP-PE-ABS |
|
Renk Kodları Color Codes |
01 02 03 04 05 06 07 |
TS EN 61386-1 Flame Retardancy Test Content:
Test Purpose: It is to determine how long the pipes in contact with flame can withstand the flame without spreading and how quickly it
extinguishes after the flame.
Testing Method: The pipe is exposed directly to a fire source for a certain period of time defined in the standard appropriate to its wall thickness in a closed cabin. During the test, the resistance of the pipe to flame is measured. When the pipe moves away from the flame, it should extinguish at the end of the period defined in the standard. The parts dripping from the pipe should not burn the paper placed under the test setup.
Acceptance Criteria: The tested pipe should be able to self-extinguish shortly after the flame source is removed. The accepted spread distance and time are determined by the standard. This test is very important to understand whether the pipes are safe and how durable they are in terms of fire safety.
Flame retardancy is a basic requirement for pipe systems, usually used in high-risk areas. However, there is a very important issue to know here. All plastics burn when exposed to fire. There is no such thing as a fireproof pipe made of PE and derivative plastics. Manufacturers produce pipes that will pass the test described in the Standard. Pipes must be tested as described in the standard and in accredited laboratories.