|
Kod Code |
Anma Çapı (mm) Nominal Diameter |
Dış Çap (mm) Outer Diameter |
İç Çap (mm) Inner Diameter |
Ambalaj (mt) Packaging |
|---|---|---|---|---|
| ELS41401 | ø14 | 14 | 9,98 | 200 |
| ELS41601 | ø16 | 16 | 11,18 | 200 |
| ELS41801 | ø18 | 18 | 13,98 | 200 |
| ELS42001 | ø20 | 20 | 15,78 | 200 |
| ELS42501 | ø22 | 25 | 20,08 | 100 |
| ELS43201 | ø32 | 32 | 26,08 | 100 |
| ELS44001 | ø40 | 40 | 21,18 | 100 |
| ELS45001 | ø50 | 50 | 40,08 | 100 |
|
Standart Standard |
TS EN 61386-22 |
|
Sıkıştırma Deneyimi Compression Resistance |
1250N-Ağır-30sn-23±2 |
|
Darbe Dayanımı Impact Compression Min. |
2 kg/100mm/-25°C |
|
Montaj Sıcaklığı Operating Temp. |
90°C |
|
Max. Çalışma Sıcaklığı Operating Temp. Max. |
60°C |
|
Min. Çalışma Sıcaklığı Operating Temp. Min. |
-25°C |
|
Hammadde Raw Material |
PE |
|
Renk Kodları Color Codes |
01 02 03 04 05 06 07 |
TS EN 61386-1 Flame Retardancy Test Content:
Test Purpose: It is to determine how long the pipes in contact with flame can withstand the flame without spreading and how quickly it
extinguishes after the flame.
Testing Method: The pipe is exposed directly to a fire source for a certain period of time defined in the standard appropriate to its wall thickness in a closed cabin. During the test, the resistance of the pipe to flame is measured. When the pipe moves away from the flame, it should extinguish at the end of the period defined in the standard. The parts dripping from the pipe should not burn the paper placed under the test setup.
Acceptance Criteria: The tested pipe should be able to self-extinguish shortly after the flame source is removed. The accepted spread distance and time are determined by the standard. This test is very important to understand whether the pipes are safe and how durable they are in terms of fire safety.
Flame retardancy is a basic requirement for pipe systems, usually used in high-risk areas. However, there is a very important issue to know here. All plastics burn when exposed to fire. There is no such thing as a fireproof pipe made of PE and derivative plastics. Manufacturers produce pipes that will pass the test described in the Standard. Pipes must be tested as described in the standard and in accredited laboratories.